How to install the latest firmware for the Swanneye HD cameras

Last Updated: Jul 07, 2015 09:48AM AEST

How to install the latest firmware for the Swanneye HD cameras (ADS-445, ADS-455, ADS-460, VIEWCAM, ADS-453)

Go to the website www.swanneye.com and click on the Download Software icon in the bottom right area.


Click on the Download icon just above Firmware at the bottom left.



Download and save the “SwannEye_HD_Firmware_V3501.1.5.2” bin file to your computer.

Use the Swanneye HD software to install the firmware update. The PC or Mac and the Swanneye HD camera must be on the same network (appears in the LAN section) so that you can access the advanced settings of the software and will therefore have access to the Upgrade section.

Click on the cog or the gear-looking icon to access the advanced settings of the camera.



Then, select the Device tab.

Click the Browse button and find the “SwannEye_HD_Firmware_V3501.1.5.2” bin file on your computer. Then, hit the Upgrade button.



After the Upgrade, reboot the camera and do a factory reset.  Performing a factory reset will allow the new firmware to be applied properly.  The camera may operate erratically if it is not reset.

 

 

Did you find this article helpful?
1bc86673995f700f34ef736316691a02b@swann.desk-mail.com
http://assets3.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete