NVR8-7400 & NHD-818/819 Firmware Release

Last Updated: May 09, 2018 05:38PM AEST

Comments Beta for commenting inside articles is now closed. Our new Community Support and discussion site is live at community.swann.com. Please post there if you have any questions about articles or require support for your Swann equipment.

A firmware has been released for the NVR8-7400 and the NHD-818 and 819 cameras.

This update is primarily to address reliability with regards to the attachment of images to email notifications.

Updating the firmware on the NVR is covered in the attached PDF.  Instructions for the cameras are below.  The firmware files are unzipped and ready to be copied straight to a USB stick.

Recorder Firmware
Camera Firmware

Apply the firmware to the cameras:

Insert the USB memory stick into one of the recorder's USB ports.

Open the menu on the recorder and proceed to System > Maintenance.

In the Maintenance tab, choose the Upgrade IPC from USB button.

On the preparation screen, please click on Browse for each camera and select the new firmware file for each channel from the USB stick.

Once all cameras have firmware files specified, click on the Upgrade button.

The progress indicators will fill and advise when all updates are complete.

Repeat this step with the old firmware file for any cameras that failed, in case some of your cameras are the first hardware revision.

NB: Attempting to update multiple cameras at once may cause incomplete updates.  Simply retry on the cameras that were incomplete and they should complete on the second attempt.

Did you find this article helpful?
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found