Choosing a download path
- Open SwannView Link software and click icon to Local Settings.
- Under General, click Browse for Download Path; otherwise, you can get the downloaded file under C:\DownloadFile by default and proceed to downloading recordings.
- Select the path you want to save recordings to.
- Click on OK then Save to apply all changes.
- Click on Playback and choose Remote Playback.
- Look for your DVR or NVR and click the camera icon to display all cameras.
- Choose the date you want to search from.
- Click and drag a camera to one of the 4 boxes to the left. It should look something like this:
- Click the Save icon located at the upper-right corner of the channel window.
- On the download window that showed up, tick the checkbox of the recording you want to save.
- Click on Download once you’re done selecting file(s).
- Once downloading is finished, under Progress, it will show Finished.
- Click on icon then select Transcode.
- If you are using a DVR-1580/4550/4750, skip this step and proceed to How to play exported recordings.
- Select Add and locate the file you just exported.
- Click Browse and choose a path where you want to save the converted file.
- Click on Transcode and it will convert the 264 file to MP4.
- Proceed to the next step.
NOTE: Check this article to know how to play the recordings on your computer: How to play exported recordings on a computer?