Swann Help Center

How can we help you?

How to reset IP cameras (for NHD-805/806/810/811/815/815AF/816/817/818/819)

For the cameras listed above, there is an extra cable that isn’t a connector but rather, a RESET button.

Steps to reset the camera:

Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely.
Press and hold the reset button.
While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.

0 comments

Article is closed for comments.