NOTE: This guide is for the following recorders : DVR-1000 (16ch), 1250, 1260, 1425, 1450, 1580, 2555, 2900, 3000, 3200, 3250, 3260, 3425, 3450, 4000, 4100, 4150, 4200, 4400, 4550, 4600, 4750, 5000, HDR6-8000, HDR6-8100, HDR4-8200, NVR-7072, 7082, 7085, 7285, 7300, 7400

Check the Device's Detail

1. If you are currently on Preview, tap the icon at the top left
   
2. Under Devices, tap on the gear icon.
   
3. Choose System.
   
4. Then check what are the first 2 digits of the Detail.
   

   1. If it starts with 57 or 58, mobile playback was not a feature of these recorders when they were released. Playback may still work, but performance may be low, and playback is only possible from the start of a video segment.
   2. If it starts with 52 or anything else, mobile playback is possible.

Searching recordings

1. Open SwannView Link app then tap Playback at the top.
   
2. Tap the camera icon at the top right.
3. Set a Start and End date and time.
   
   

   4. Tap on the recorder below the calendar.
   5. Choose a camera (check box at the right will be ticked).
   6. Tap on Start Search.

7. Tap on any of the Play buttons available.