Swann Help Center

How can we help you?

Click here to find your Swann device model

Menu

Articles in this section

See more

Pair your doorbell on SwannBuzz app Follow

SwannBuzz app, available on both Android and iOS devices, is used to pair Smart Video Doorbell ADS-WVDP720. This article will focus on guiding you how to pair your Smart Video Doorbell ADS-WVDP720.

Before we start, you need to make sure that you not only download the app, but also register an account. Also, for faster setup, connect your phone to the WiFi where you wish to setup the doorbell to.

Tap either:

  • Set Up New Device button (as shown)
  • Menu (upper left) then select Pair Doorbell.

Tap Start.

Set the doorbell to pairing mode

  1. Press and hold the Reset and Doorbell button
  2. After few seconds, release the Reset button
  3. Wait for 5 seconds then release the Doorbell button
  4. Double check the LED around the doorbell button is now blinking blue slowly.

 

Once done, tap Next
Tap Go to Wi-Fi Settings

Connect to the hotspot that starts with SwannVDB. Last 4 characters should be the last 4 characters of the MAC address of the Doorphone shown at the sticker at the back of the unit.

 

Once connected, tap/swipe Back (Android) or tap Back (iOS; located at the top-left) to go back to the SwannBuzz app

Choose your WiFi (only works with 2.4GHz Wi-Fi) you want the doorbell to be connected to, then enter the WiFi password correctly.

 

Then tap Next.

Once you see Setup Complete, just type the name you want and tap on Done.

Related articles

Comments

0 comments

Article is closed for comments.