Where to get the Device ID or MAC Address of Swann Security Cameras and Sensors
The MAC Address is also the Device ID of the camera which can be used to manually pair the camera or sensor to the Swann Security app if your phone's camera is unable to scan the QR code. However, the camera still needs to be physically accessible to factory reset for pairing.
Select the model number of your camera or sensor below:
- SWIFI-SE2KBC
- SWIFI-SEVDBC
- SWIFI-SE2KPT
- SWIFI-SE2KIC
- SWIFI-2KICAM / SWIFI-ALERTCAM / WHD-INDCAM
- SWIFI-2KOCAM / SWIFI-SPOTCAM / WHD-OUTCAM
- SWIFI-PTCAM2
- SWIFI-FLOCAM2 / WHD-FLOCAM
- SWIFI-4KFLOCAM
- SWIFI-CAM
- WHD-INTCAM
- SWIFI-TRACKCM
- SWIFI-XTRCM / SWIFI-XTRCAM / SWIFI-4KXTRM / SWIFI-4KXTRMECO
- SWIFI-SLMFLCM
- SWIFI-BUDDY / SWIFI-4KBUDDY
- SWIFI-CORECAM / SWIFI-COREPRO
- SWIFI-FOURTIFY
- Swann Security Sensors
SWIFI-ALERTCAM / WHD-INDCAM
- INDCAM – label shows MAC
- ALERTCAM – label shows ID
SWIFI-SPOTCAM / WHD-OUTCAM
- OUTCAM (left) – label shows MAC
- SPOTCAM (right) – label shows ID
SWIFI-PTCAM2
Underneath the camera
SWIFI-FLOCAM2 / WHD-FLOCAM
Behind the camera module
SWIFI-CAM
Underneath the camera
WHD-INTCAM
SWIFI-TRACKCM
Underneath the base of the camera
SWIFI-XTRCM / SWIFI-XTRCAM / SWIFI-4KXTRM
Underneath the camera
SWIFI-SLMFLCM
Behind the camera module
SWIFI-BUDDY / SWIFI-4KBUDDY
Behind the doorbell
SWIFI-CORECAM / SWIFI-COREPRO
Behind the camera
SWIFI-FOURTIFY
At the chin area / below the camera
Swann Security Sensors
|
SWIFI-MOTION remove the cover; below the PIR |
SWIFI-WDOOR behind the battery cover |
|
SWIFI-LEAK behind the battery cover |
SWIFI-ISIREN top of the siren |
SWIFI-4KFLOCAM
At the top of the camera
SWIFI-SE2KIC
At the back of the camera
SWIFI-SE2KPT
Behind the base of the camera
SWIFI-SEVDBC
Behind the doorbell
SWIFI-SE2KBC
Behind the camera