Where to Find the QR Code or Device ID on Your Swann Security Device
If you're pairing a Swann Security device, you'll usually need to scan its QR code. If the QR code is damaged or difficult to access, you can manually enter the Device ID (Camera ID) instead (only for standalone cameras).
This guide shows where to find the QR code or Device ID on your Swann device before you begin pairing.
Things to Know
- The QR code is required when pairing a device with the Swann Security app.
- Standalone cameras also have a Device ID (Camera ID) that can be entered manually if the QR code cannot be scanned.
- Recorders, sensors, siren, and personal alarms do not support manual Device ID entry during pairing.
- QR codes on MaxRanger4K™ cameras are use to pair the camera to your already paired MaxRanger4K™ system
Learn more here
Step-by-Step Guide
DVRs and NVRs
NVW-800
NVW-650 and MaxRanger4K™
QR on System
This applies to DVRs, NVR, AdvancedX™, and EliteX™ systems
QR on Maintenance
This applies to EliteX™ system
SWIFI-4KPTBC
SWIFI-SESOL2KBC
SWIFI-SE2KBC
SWIFI-4KXTRMECO
This also applies to SWIFI-XTRCAM and SWIFI-4KXTRM
SWIFI-SEVDBC
This also applies to SWIFI-EVODB, SWIFI-4KBUDDY, and SWIFI-BUDDY
SWIFI-SE2KPT
SWIFI-SE2KIC
SWIFI-4KFLOCAM
SWIFI-COREPRO
This also applies to SWIFI-CORECAM
SWIFI-2KOCAM
This also applies to SWIFI-SPOTCAM
SWIFI-2KICAM
SWIFI-FOURTIFY
SWIFI-CAM
SWIFI-PTCAM2
SWIFI-FLOCAM2
SWIFI-TRACKCM
SWIFI-ALERTCAM
SWIFI-SLMFLC
SWIFI-MOTION
SWIFI-WDOOR
SWIFI-LEAK
SWIFI-ISIREN
ActiveResponse Personal Safety Alarm
This applies to SWIFI-ACTIVEG2A, SWIFI-ACTIVEG2B, SWIFI-MPRSB, SWIFI-MPRST
Why It Matters
Knowing where to find the QR code or Device ID can save time during setup and help you pair your device even if the label is scratched, faded, or difficult to scan.
Related Scenarios or Questions
Can I Use the Device ID Instead of the QR Code?
Yes, but for standalone cameras only
I can't scan the QR code. What should I do?
Enter the Device ID (Camera ID) if you have a standalone camera.
My QR code label is damaged. Can I still pair my device?
Yes, using its Device ID if you have a standalone camera. For recorders, access the settings to get a digital version of your QR code sticker
Summary
Most Swann Security devices use a QR code for pairing. If your standalone camera cannot be scanned, you can manually enter its Camera ID instead.