Checking for Firmware Updates on Your Swann Security Devices

Select the type of product paired to your Swann Security app:

• Recorders
• Add-on cameras for your recorders (NHD and NVW cameras)
• Add-on cameras for MaxRanger4K™ lineup
• Stand-alone cameras

For Swann Security recorders*

To know what Software Version your unit has, you can check it via Swann Security app (if already paired to your account) or Main Menu.

Full instruction in this article: Where to Find the MAC Address and Firmware Version of Your Swann Security Device

Visit How to Update Firmware on Your Swann Recorder and enter your model number to see what's the latest software version for your recorder.

For NVR/NVW Add-on cameras*

Each NVR/NVW camera has its own software version.

1. Go to Menu > Display> IP channel.
2. Take note of the Device Type (this is the camera's model number) and Software Version.

Check each article if it covers the model number of your camera, then follow the instructions on how to update it.

• How to Update NHD Camera Firmware on Your NVR System
• How to update the firmware of an NHD-875xx/NHD-876xxx using the 87x Upgrade Tool
• How to Update Your Wireless Add-on Camera Firmware - for NVW cameras

For MaxRanger4K™ Add-on cameras

You can check or update to the latest firmware by following this article

For Swann Security Standalone cameras*

You will receive a prompt in the Swann Security app to update your camera's software if it is not updated. Internet connection is required for the camera and your mobile device to check for firmware updates.

You can visit How to Update Your Stand-alone Camera Firmware: A Step-by-Step Guide for the instructions on how to update the camera.