How to Pair a Chime to Your Swann Security Doorbell
Getting your security system set up should be simple, and pairing a chime with your doorbell is no different. Whether you want to hear your doorbell from multiple rooms in your home or ensure you never miss a visitor, adding multiple chimes can make a big difference. You can pair several chimes with your doorbell for wider coverage, but it’s important to note that you can’t pair multiple doorbells to a single chime. This guide will walk you through how to get it done.
NOTE: The chime that came with your doorbell comes pre-paired. If it isn't paired or you have an extra chime or you want to pair it to a different doorbell, then you can follow the instructions below.
Pairing the Chime
Press and hold the 'Set' button until it says "Ready for Pairing", along with the instructions on pairing it. The button is located on top of the chime.
The LED beside it will continue blinking, letting you know it is in Pairing mode. If it isn't paired, the LED will stop blinking.
Once it is in Pairing mode, press and hold the doorbell button to connect. It will say "Your device is now connected".
NOTE: You can change the melody by pressing the 'Set' button on the chime. Press the doorbell to hear the selected melody.
Conclusion
Pairing your chime with your doorbell is a great way to make sure you always hear when someone is at the door, no matter where you are in your home. And remember, while you can connect several chimes to one doorbell, it only works the other way around—each chime can only sync with one doorbell. Now that you've got everything set up, you can enjoy the convenience and peace of mind that comes with hearing your security system in action throughout your home.