How to Pair an Add-on NVW Camera to the Hub
Tags: NVW camera pairing, add-on camera setup, hub connection, wireless camera integration, security system expansion, compatible recorders, camera compatibility chart, live view mode, channel selection, pairing button, NVW-AS4KCAM, NVW-600CMB, AllSecure cameras, NVW-800CAM, NVW-500CAM, SecureAlert cameras, IR LEDs flashing, pairing troubleshooting
This guide shows you how to pair an Add-on camera via the Hub's interface.
Before You Begin:
- Make sure that the add-on camera is charged or powered on.
- Ensure that it is near the hub during pairing.
Quick reminder! An add-on camera must be connected to a compatible recorder to be viewed on a phone or computer. Refer to this Camera Compatibility Chart to check the compatible recorder for this camera.
Pairing Using the Hub's Menu
Ideal for wired setups or users who prefer physical interfaces. Requires mouse + monitor connected to the hub
- From Live View, click the camera icon at the top-right of an empty channel.
- The hub will enter pairing mode and start scanning.
Choose the model of your camera below:
NVW-AS4KCAM and NVW-600CMB
Remove the cap covering the pair button. Press and hold the pair button for 5 seconds, then release. The pairing will commence, and the camera’s IR LEDs will start flashing.
View larger
NVW-800CAM and NVW-500CAM
Remove the cap covering the pair button. Press and hold the pair button for 3 seconds, then release. The pairing will commence, and the camera’s IR LEDs will start flashing.
View larger
Wait a few moments—the camera feed will appear once pairing is complete.
NOTE: You can also find the instruction in the camera's manual (select your camera and check the guide in the Manual tab)