How to Set Up Swann Security for PC and Mac
Tags: set up swann security, swann pc setup, mac software installation, computer security access, dvr and nvr software, camera monitoring on pc, recorder setup guide, add recorder to pc, configure swann software, desktop security software, viewing cameras on pc, login to recorder, swann app alternative, camera software download, pc and mac guide, recording on computer, adjust camera streaming, desktop security access, connect cameras to computer, security system software, laptop
Access your Swann recorder remotely from your computer with ease.
This guide will walk you through installing the Swann Security software on your PC or Mac, setting it up securely, and connecting it to your recorder for remote viewing.
Quick Overview
Before you begin, ensure:
- Recorder Connection: Your recorder is connected to your router.
- Mobile App Access: If you've already added your recorder in the Swann Security mobile app, you can skip the recorder setup section.
- System Requirements: Your computer meets the minimum system requirements listed below.
Minimum System Requirements
| Specifications | |
|---|---|
| Operating System | Windows 10 or later | macOS 15 “Sequoia” |
| CPU | Intel 9th Gen or AMD Ryzen Quad Core @ 3GHz or higher |
| RAM | 16GB (32GB recommended) |
| Graphics | Dedicated Graphics Card |
| Storage | 500GB (for software and clips) |
| Upload Speed | 4Mbps (8Mbps recommended) |
Choose Your Path
Encountering an issue? Jump to the relevant section:
- Need to download the software? → Section 1
- Prompted to set a password? → Section 2
- Recorder not appearing? → Section 3
- Cameras not displaying? → Section 4
1. Download the Swann Security Software
- For Windows: Download Swann Security for Windows (v2.15.0)
- For Mac: Download Swann Security for macOS (v2.13.02)
Installation Steps:
- Click the appropriate link above for your operating system.
- Open the downloaded file.
- Follow the on-screen instructions to complete the installation.
Why this helps: Installing the Swann Security software allows your computer to interface directly with your recorder, enabling live and recorded video access.
Have trouble installing it on Mac? Visit How to Install Swann Security for Mac and follow the instructions carefully.
2. Set Up a Local Password
Upon first launching the software:
Set a Password: Create a strong password to prevent unauthorized access to this program.
Set a Security Question: Choose a question and provide an answer to assist in password recovery.
Login: Use the username admin and the password you've just set.
Why this helps: Establishing a local password ensures that only authorized users can access your security system from this computer.
3. Add Your Recorder to the Software
To connect your recorder:
Click the icon (top-left), then select
Click the icon (top-right) to add a new device.
Fill in the following details:
- Device Name: Assign a name for easy identification.
-
Login Type: Select
ID. - ID: Enter the 20-character alphanumeric code found on your recorder.
-
Protocol: Choose
Private. -
HTTP Port: Default is
85. -
Username: Default is
admin. - Password: Enter your recorder's admin password.
Click to complete the setup.
Why this helps: Adding your recorder links it to the software, enabling remote viewing and management.
4. View Your Cameras
After adding your recorder:
- The software should automatically display all connected cameras.
- If not, navigate to .
- Drag and drop the recorder from the left panel into the viewing area on the right.
Why this helps: This step ensures your camera feeds are visible and accessible for monitoring.
Troubleshooting Tips
Recorder Not Added Successfully?
- Restart your recorder and router.
- Verify the ID and credentials entered are correct.
Cameras Not Displaying?
- Confirm cameras are properly connected and powered.
- Check that cameras are streaming on the recorder's display.
- Try re-adding the recorder in the software.
Summary & Next Steps
You've successfully:
- Installed the Swann Security software.
- Secured the application with a password.
- Connected your recorder.
- Accessed your camera feeds.
If issues persist, contact Swann Support for further assistance.