How to Find Your Swann Product Information: Model, P2P/UID, MAC, Serial Number, and Firmware
Swann Tech Support will always require the exact product model.
For troubleshooting, the following are required: P2P or UID, MAC address or commonly known as ID.
Serial Number (S/N) of your device is required in order to proceed with processing of your request (e.g. change ownership of a device).
Different products listed below have different ways of finding this information. Click on the tab for your device type and follow the guide.
- Recorders - such as DVRs, NVRs, and NVW800 / AllSecure650 (also known as wireless NVR)
- Security Cameras for your recorder - needs a recorder to operate for capturing footages
- Battery/Wireless (IP) Cameras - a standalone camera and no recorder required
- Security Sensors - such as Door Alert, Motion Alert, Siren, and Leak Alert Sensor
Choose the product that you have:
- Product Model and Serial Number (S/N) on Sticker
- P2P or UID on Sticker
- Product Model, Firmware version, P2P or UID, and MAC address via System Console
- Product Model, P2P or UID, and MAC address via Swann Security App
- Kit Code on the Packaging
Product Model and Serial Number (S/N) on Sticker
For recorders, the Product Model and Serial Number (S/N) are indicated on the sticker underneath unit or on the back for NVW and AllSecure devices. The code usually starts with DVR, NVR, NVW or sometimes SW / SR followed by a 'dash' or 'hyphen' and a series of numbers.
P2P or UID on Sticker
The P2P or UID together with the QR code is indicated on the sticker on top or back of the recorder.
Product Model, Firmware version, P2P or UID, and MAC address via System Console
The Product Model, Software/Firmware (FW) version, P2P or UID and MAC address of your recorder can be found in the Information tab of your recorder's console menu. Login to your recorder and navigate to Setup > System > Information tab.
Product Model, P2P or UID, and MAC address via Swann Security App
The Product Model, Software/Firmware (FW) version, P2P or UID, and MAC address of your recorder can also be found on the Swann Security app if your device is linked to your account. On the mobile app, open the Devices tab (bottom right corner) > Name of your Device > About Device.
Kit Code on the Packaging
Alternatively, you can provide us the kit code of your Swann device from the retail box.
- Product Model on Sticker
- Product Model and Firmware version via System Console - for NVR recorders
- Product Model and Firmware (FW) version via System Console - for NVW and AllSecure650 recorders
- Kit Code on the Packaging
Product Model on Sticker
For security cameras, the Product Model is indicated on the sticker around the camera casing. The code usually starts with PRO or NHD followed by a 'dash' or 'hyphen' and a series of numbers.
Product Model and Firmware version via System Console - for NVR recorders
The Product Model and Software/Firmware (FW) version of your NHD series security camera can be found in the IP Channel tab of your recorder's console menu. Login to your recorder and navigate to Setup > Display > IP Channel tab.
Product Model and Firmware (FW) version via System Console - for NVW and AllSecure650 recorders
The Product Model and Software/FW version of your NVW series security camera can be found in the IP Channel tab of your recorder's console menu. Login to your recorder and navigate to Setup > Camera > Wireless Camera tab. Please note that the Device Type is on the last tab of this window.
Kit Code on the Packaging
Alternatively, you can provide us the kit code of your Swann device from the retail box.
- Product Model, MAC address or ID, and Serial Number (S/N) on Sticker
- Product Model, Firmware version, P2P or UID, and MAC address via Swann Security App
- Kit Code on the Packaging
Product Model, MAC address or ID, and Serial Number (S/N) on Sticker
For Battery/Wireless (IP) cameras, the Product Model is indicated on the sticker or printed around the camera body or underneath the unit. The code usually starts with SWIFI, SWWHD, or SWAD.
Product Model, Firmware version, P2P or UID, and MAC address via Swann Security App
The Product Model, Software/Firmware (FW) version, P2P or UID, and MAC address of your Battery/Wireless (IP) camera can be found on the Swann Security app. On the mobile app, open the Devices tab (bottom right corner) > Name of your Device > About Device.
Kit Code on the Packaging
Alternatively, you can provide us the kit code of your Swann device from the retail box.
Product Model on Sticker
For sensors, the Product Model is indicated on the sticker or printed around the body or underneath the unit. The code usually starts with SWIFI.
Firmware and MAC address via Swann Security App
The Software/Firmware (FW) version and MAC address of your sensor can be found on the Swann Security app. On the mobile app, open the Devices tab (bottom right corner) > Name of your Device > About Device.
Kit Code on the Packaging
Alternatively, you can provide us the kit code of your Swann device from the retail box.