Step-by-Step Guide to Wireless Setup with SWACC-USBWIFI for Swann Recorders
Swann is constantly coming up with new ways to keep your house or place of business safe because we understand how much you value peace of mind. In this article, you will:
- Learn about the pros and cons of setting your recorder to be wirelessly connected to your network
- Understand if this fit your needs, then be guided on how to set it up.
Here are some key information about SWACC-USBWIFI - USB Wi-Fi Antenna for DVR or NVR
- Connects to 2.4 GHz Wi-Fi
- Compatible with recorders with Software version V8 or above
Wireless vs. Wired: Selecting the Ideal Link
You can use either the cordless SWACC-USBWIFI or the traditional ethernet connection to connect your recorder. Which is the best for you, let's see?
| Connection | Good Stuff | Downside |
|---|---|---|
| Connection via Wire | Extremely dependable and quick connection that is unlikely to be lost | There are a lot of wires to manage and space for your recorder is limited |
| SWACC-USBWIFI Wireless Connection | No more tangled cables—you can put your recorder anywhere! | Other devices may have an impact on the signal and it may occasionally hiccup |
Configuring Your SWACC-USBWIFI Is Simple
We'll walk you through the setup process, making it a breeze; just follow these steps:
Check the recorder's firmware
To check what is the recorder's current Software and Agent version:
- Go to your recorder's Menu.
- Select System, then Information.
The USB Wi-Fi Antenna works with recorders compatible with Swann Security platform and must have Software version V8 or above.
Disconnect the Ethernet cable
The recorder, just like computers, will prioritize hard-wired connection if available. Disconnect the Ethernet cable to make the recorder use the USB Wi-Fi antenna for network connection.
Connect the USB Wi-Fi antenna
Connect the USB Wi-Fi antenna to any of the USB ports available and wait for a few seconds for the system to properly recognize the dongle. Both front and back USB port can be used.
Choose your Wi-Fi
Access the Menu and go to Network then select Wi-Fi.
Tip: If you can't see the Wi-Fi tab, unplug the antenna and try a different port and/or reboot the recorder while the USB Wi-Fi antenna is still connected. If none of the USB port works after rebooting and your recorder is compatible, has software version V8 and above, and the mouse works on those ports, then the USB Wi-Fi antenna could be faulty.
Please note that non-Swann Wi-Fi dongle is not supported!
Click Scan to see a list of available Wi-Fi network. Select your Wi-Fi and click Save.
Pro Tip: Can't seem to find the name of your router when setting it up? The SWACC-USBWIFI only supports 2.4 GHz, hence your phone might be detecting a 5 GHz network. Also consider that your Wi-Fi could be set to 'hidden' in its Settings; please check you modem or router's settings.
Enter your Wi-Fi Password
Enter the password of your Wi-Fi then click Connect.
Click the 'Eye' icon opposite the 'Password' to see the characters you have selected.
If successful, the recorder will be connected to your Wi-Fi. Click OK and Apply.
Tip:If the Wi-Fi dongle needs to be removed, click the “USB Wi-Fi” button on the Menu Bar (next to the date & time), then click “Safely remove USB Devices”. Remove the Wi-Fi dongle then click “OK”.
Security and Freedom Combined
Swann gives you the flexibility to place your recorder wherever without sacrificing a reliable connection with the SWACC-USBWIFI. This provides you with the newest security options whether you choose to use wireless technology or the tried-and-true wired connection.