Complete Guide to Connecting an NVW Power Hub to a Wireless Router
Tags: connect nvw power hub to wi-fi, wireless hub setup, power hub wi-fi pairing, 2.4 ghz network connection, wi-fi password entry, hub menu navigation, network scan feature, wi-fi not appearing, connection fails after password entry, move closer to router, factory reset hub, router dual-band setup, router broadcasting ssid, network troubleshooting guide, confirm link status, secure communication setup, monitor & mouse connection, uninterrupted access, setup summary steps, hub power on
This guide will walk you through connecting your Swann NVW Power Hub (AllSecure or SecureAlert™ Hubs) to your Wi-Fi network—no cables required.
You’ll be online in minutes, ready to enjoy secure and uninterrupted access to your security system.
Before you begin, check:
- Connect a monitor and a mouse to the hub.
- Your 2.4 GHz Wi-Fi network is active and broadcasting.
- You know your Wi-Fi password.
- The Power Hub is powered on and within range of your router.
Find Your Starting Point
- Just setting up for the first time? →
- Wi-Fi network not appearing? →
- Password entered, but can’t connect? →
Standard Wireless Setup
Access the Menu
Right-click on your mouse, then select the first icon on the taskbar then choose
Go to then choose
Click and wait a few seconds—your available Wi-Fi networks will appear.
View larger
Scan Your Wi-Fi
Click to choose your Wi-Fi, then click
- If no networks appear, click
Why this helps? The scan ensures your Power Hub can “see” your router before trying to connect.
If that didn’t work: Go to Wi-Fi Not Appearing
Enter Your Wi-Fi Password
In the password field, type your Wi-Fi password carefully.
- Click the eye icon to display the Wi-Fi password (optional).
Click
- If your network doesn’t require a password, click instead.
Why this helps? Accurate credentials are the key to a secure connection.
If that didn’t work: Go to Connection Fails After Password Entry
Confirm Connection
- Wait a few moments while your Power Hub connects.
- When Link Status shows
Connected, you’re good to go. - Click to finish.
Why this helps? This step verifies that your Power Hub is successfully linked to your router for secure communication.
Wi-Fi Not Appearing
- Make sure your router is on and broadcasting its SSID (network name).
- Move the Power Hub closer to the router and scan again.
- Restart your Power Hub and repeat the scan.
If that didn’t work: Try factory resetting your Swann hub.
Connection Fails After Password Entry
- Double-check your Wi-Fi password (case-sensitive).
- Confirm your router is set to 2.4 GHz or dual-band mode.
- Reboot your router and try again.
If that didn’t work: Contact Swann Technical Support for advanced troubleshooting.
Summary & Next Steps
You’ve learned how to:
- Scan for and select your Wi-Fi network.
- Enter and verify your Wi-Fi password.
- Confirm your NVW Power Hub is connected.
If your Hub still won’t connect, reach out to Swann Technical Support for guided assistance.