How to Turn Auto Tracking On or Off
Last updated:
Auto Tracking allows supported Swann Pan & Tilt cameras to automatically follow a moving subject within the camera's view. You can turn this feature on or off anytime through the Swann Security app.
This feature is available on the MaxRanger4K MaxTrak™ Pan & Tilt Camera and supported Pan & Tilt Standalone Cameras.
Supported Cameras
Auto Tracking is available on these cameras:
- NVW-MR4KPT - MaxRanger4K MaxTrak™ Pan & Tilt Camera (camera must be paired to MaxRanger4K™ Base Station)
- SWIFI-SE2KPT - Swann EVO Pan & Tilt Wi-Fi Camera
- SWIFI-4KPTBC - 4K Pan & Tilt Wireless Security Camera
The SWIFI-SE2KPT and SWIFI-4KPTBC are collectively referred to as Pan & Tilt Standalone Cameras in this article.
How to Turn Auto Tracking On or Off
The steps depend on which type of camera you have.
Before you proceed, please choose your phone type
Then, choose the camera that you have below
MaxRanger4K MaxTrak™
- Open the Swann Security app.
- Tap More, then select your Base Station.
- Go to Camera Settings.
- Choose your Pan & Tilt camera then tap Pan & Tilt Settings.
- Find Auto Tracking then toggle the switch ON to enable or OFF to disable it.
Pan & Tilt Standalone Cameras
- Open the Swann Security app.
- Tap More, then select your supported Pan & Tilt Standalone Camera.
- Go to Pan & Tilt Settings.
- Find Auto Tracking then toggle the switch ON to enable or OFF to disable it.
What Does Auto Tracking Do?
When Auto Tracking is enabled, the camera automatically follows a moving subject by adjusting its Pan & Tilt position. This helps keep the subject within the camera's view without requiring you to manually move the camera.
When Auto Tracking is disabled, the camera will not automatically follow moving subjects. You can still manually control the camera's Pan & Tilt movement where supported.
Why Use Auto Tracking?
Auto Tracking can be useful when monitoring areas where people or vehicles frequently move through the camera's view, such as driveways, yards, entrances, and walkways.
Summary
Auto Tracking can be turned on or off from the Pan & Tilt Settings in the Swann Security app. The exact steps depend on whether you are using a MaxRanger4K MaxTrak™ or a supported Pan & Tilt Standalone Camera.